MarkDoronin

Your Replies

  • MarkDoronin
    Community Member
    June 9, 2022 at 11:01 am
    Up
    1
    Down

    Code P0088 indicates a problem with the fuel supply system, namely too high pressure in the fuel rail or fuel system. P0087 may also appear with this error, as well as other errors related to misfires in the engine cylinders and the engine running on a too lean or too rich fuel mixture. P0088 is a general trouble code that indicates that the engine control module (ECM) has detected a problem with the fuel delivery system. This error will occur if the vehicle’s ECM receives a signal from the fuel pressure sensor indicating that the fuel pressure is too high. When a P0088 error occurs, the Check Engine light will come on on the vehicle’s dashboard, indicating a malfunction. The ECM will also put the vehicle into emergency mode to prevent further damage. The vehicle will remain in this mode until the error is corrected.

    MarkDoronin
    Community Member
    May 24, 2022 at 4:58 pm
    Up
    0
    Down

    Try to find local car electric, because it’s difficult question.

    MarkDoronin
    Community Member
    May 25, 2022 at 7:04 am
    Up
    0
    Down

    I think it’s problem in software.

    MarkDoronin
    Community Member
    May 30, 2022 at 2:46 pm
    Up
    0
    Down

    the radiator or cooling fan must be

    MarkDoronin
    Community Member
    May 30, 2022 at 2:55 pm
    Up
    0
    Down

    If I understand correctly, then you have a broken radiator. I think it should be easy to fix if there is a part you need

    MarkDoronin
    Community Member
    May 30, 2022 at 3:11 pm
    Up
    0
    Down Accepted answer

    I agree, the solution can be banal and save a lot of money!

    MarkDoronin
    Community Member
    June 9, 2022 at 10:49 am
    Up
    0
    Down

    did you get a warranty on the clutch?

    MarkDoronin
    Community Member
    June 9, 2022 at 10:58 am
    Up
    0
    Down

    If there are problems with the engine or the Check Engine light comes on, the driver must immediately go to the service or independently diagnose the car using a scanner. One of the errors that the master runs the risk of encountering during diagnostics is encrypted under the code P0011. It stands for “Camshaft Position Error”. Error P0011 indicates that malfunctions have been found in the variable valve timing system, expressed by the operation of the camshaft with excessive advance.

    MarkDoronin
    Community Member
    June 9, 2022 at 11:05 am
    Up
    0
    Down

    I think that you should not worry if everything is in order with the car now. If there is a problem, it will definitely come up and you will understand when it will be necessary to contact a specialist.

    MarkDoronin
    Community Member
    May 30, 2022 at 3:20 pm
    Up
    -1
    Down

    quite decent, according to the photo, the condition is not bad for this year of birth of a car. depending on how much money the car costs and whether you can afford it. The mileage for this brand is negligible. but be prepared for expenses – replacing consumables in order to have a reliable friend for every day is also an expensive pleasure